基于FAX／40E电话语音／传真卡的通信技术研究

以一个基于 FAX/ 40 E电话语音 /传真卡技术的传真系统为例 ,重点研究 FAX/ 40 E电话语音 /传真卡技术与计算机之间的通信技术 ,并讨论有关多线程技术问题。     

用环境友好催化剂合成丙酸异丁酯的研究

报道了以固载杂多酸盐TiSiW12O40/TiO2为环境友好催化剂，对以丙酸和异丁醇为原料合成丙酸异丁酯的反应条件进行了研究。实验表明：TiSiW12O40/TiO2是合成丙酸异丁酯的良好催化剂，最佳反应条件为：n（醇）：n(酸）=1.2:1，催化剂用量为反应物料总质量的2.0%。反应时间1.0h，反应温度106-125℃，上述条件下，丙酸异丁酯的收率可达79.1%。     

温度敏感葡聚糖凝胶的合成及其细胞相容性研究

合成了N-异丙基丙烯酰胺（NIPAAm）与葡聚糖的共聚水凝胶，利用红外光谱表征了单体和凝胶结构，研究了水凝胶在去离子水和细胞培养基中的温度响应性，并对凝胶进行了细胞培养和脱附研究．结果表明，共聚凝胶具有很好的温度敏感性和细胞相容性，可以通过控制温度变化，实现对细胞的无损伤脱附．     

40Cr钢表面纳米层的微观结构

采用高能表面处理技术在40Cr钢表面制备出具有纳米晶体结构特征的表面层。利用透射电子显微镜和穆斯堡尔谱仪分析研究了表面纳米层的微观结构。结果表明，经过高能表面处理后，样品表面层晶粒细化为纳米晶，平均晶粒尺寸约为11nm。表面纳米层表面处渗碳体发生溶解。     

TiSiW12O40/TiO2催化合成丙酸正丙酯

研究了固载杂多酸盐TiSiW12O40/TiO2催化丙酸与正丙醇的酯化反应，探讨了催化剂用量，反应时间及醇酸摩尔比对酯收率的影响。当醇酸摩尔比为1.3:1，催化剂的量为醇酸总质量的1.5%。反应时间为1.0h，酯产率可达71.4%以上，采用该催化剂合成丙酸正丙酯不仅酯化反应温度低，反应时间较短，催化剂用量少，而且可较好地回收利用，可降低成本；因此，TiSiW12O40/TiO2是合成丙酸正丙酯的优良催化剂，具有良好的应用前景。     

合成氯乙酸正丁酯的催化剂研究进展

综述了改性ZSM-5分子筛,有机锡,氯化铁,TiSiW_(12)O_(40)/TiO_2,CaO脱水法,锆酸酯、杂多钨锗酸等7种不同催化剂催化合成氯乙酸正丁酯的实验结果。结果表明:SO_4~(2-)/TiO_2-Al_2O_3,TiSiW_(12)O_(40)/TiO_2,SO_4~(2-)/膨润土及磷钨杂多酸14种催化剂对合成氯乙酸正丁酯的酯收率较高,具有实际应用价值。     

调质状态下40Cr钢的焊接

在合理制定焊接工艺的基础上，采用R307珠光体耐热钢焊条成功地进行40Cr钢在调质状态下的焊接，解决了通常采用25—13型奥氏体焊条焊接出现的焊缝强度低、焊接接头性能差的问题。     

Partial or total silylation of dextran with hexamethyldisilazane

The silylation reaction of dextran with 1,1,1,3,3,3-hexamethyldisilazane (HMDS) in DMSO was studied as the first step of the synthesis of new amphiphilic polyester-grafted dextrans. According to the experimental conditions, i.e. dextran molar weight, medium temperature and reaction time, HMDS/OH ratio, addition of a catalyst and co-solvent, partially or totally silylated dextrans were recovered. The highest silylation yields were obtained with the lowest molecular weight dextrans. The increase in temperature medium and/or reaction time, the presence of catalyst or co-solvent favored the protection yield. Whatever the dextran used, complete silylation of the polysaccharide chain could be achieved by adequate selection of the experimental conditions. The thermal properties of resulting silylated polysaccharides were investigated by temperature modulated DSC. It was observed that T_g values of partially silylated dextran were maintained between 120 and 140 °C, independently of the dextran molecular weight. Interestingly, DMSO proved to behave as an efficient plasticizer of (partially) silylated dextrans. The partially silylated dextrans were efficiently used as multifunctional macroinitiators for the controlled ring-opening polymerization (ROP) of lactone. The ROP was then promoted from the remaining hydroxyl groups in the presence of tin or aluminium activator. After polymerization and ultimate deprotection of the silylated dextran backbone, amphiphilic polyester-grafted dextrans were readily recovered.